SynFoam HTC is a castable syntactic foam that has exceptional dielectric and low loss properties. SynFoam HTC can be used at temperatures up to
180oC and is resistant to water, chemcicals, and hydrocarbon fluids. The castable nature of the product eliminates the need for machining and is suitable for use with standard RTM and mix-meter equipment.
The surface finish of parts molded from SynFoam HTC varies from high gloss to matte depending on the finish of the mold.
SynFoam HTC has been used in the fabrication of radomes, antennas, reflectors, and radar absorbing coomposites.
SynFoam HTC is available as 1, 2, and 5 gallon kits. Each kit contains an A and B side that must be mixed together prior to casting. SynFoam HTC will require a temperature of 150oF to cure
with higher postcure temperatures recommended to reach the maximum service use temperature. Please consult the
appropriate instructions prior to using HTC.
If you have a specific mold for use with SynFoam HTC we also provide final casting and fabrication services.
ADDITIONAL INFORMATION
Grade | Density, lbs/ft3 |
Compressive Strength, psi |
Compressive Modulus, psi |
Dielectric Constant |
Tg, oC |
CTE, ppm |
Sound Velocity, m/s |
---|---|---|---|---|---|---|---|
HTC-38 | 38 ± 2 | 5,200 | 230,000 | 1.85 | 180 | 38.0 | 2,600 |
HTC-43 | 43 ± 2 | 9,000 | 280,000 | 1.95 | 180 | 50.2 | 2,700 |
HTC-48 | 48 ± 2 | 18,000 | 410,000 | 2.05 | 180 | 49.5 | 2,950 |
For More Information please contact us by phone at (973)994-4334 or by
e-mail at info@synfoam.com to further discuss your application.